RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203
TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350
Rogers RT/duroid 6006 microwave laminates are ceramic-PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15.
PCB Capability (RT/duroid 6006)
| PCB Material: | Ceramic-PTFE composite |
| Designator: | RT/duroid 6006 |
| Dielectric constant: | 6.15 ±0.15 (process) |
| 6.45 (design) | |
| Layer count: | 1 Layer, 2 Layer |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 10mil (0.254mm), 25mil (0.635mm) |
| 50mil (1.27mm), 75mil (1.90mm) | |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Tin, Immersion Silver and OSP. |
RT/duroid 6006 microwave laminates feature ease of fabrication and stability in use. This property results in the possibility of mass production and reducing the cost of goods. It has tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.
Features and Benefits
1. High dielectric constant for circuit size reduction
2. Low loss. Ideal for operating at X-bank or below
3. Tight DK and thickness control for repeatable circuit performance
The typical applications are aircraft collision avoidance systems, ground radar warning systems, patch antennas, satellite communications systems etc.
Contact Person: Miss. Sally Mao
Tel: 86-755-27374847
Fax: 86-755-27374947
