logo
Contact Us

Contact Person : Sally Mao

Phone Number : 86-755-27374847

WhatsApp : +8618277967574

Free call

F4BTMS350 DK3.5 with RTF low-roughness copper foil High-Reliability Laminate and Custom 2layer PCB Solutions

Brand Name: Wangling Model Number: F4BTMS350

Product Description

 

F4BTMS350 is a high-performance, ceramic-filled PTFE laminate from the F4BTMS series, an upgraded family developed for demanding aerospace, defense, and high-frequency applications. The material uses a small amount of ultra-thin, ultra-fine glass cloth reinforcement combined with a large amount of uniformly distributed nano-ceramic filler in a PTFE resin system. This construction minimizes glass-weave effects on electromagnetic wave propagation, reduces dielectric loss, improves dimensional stability, and lowers X/Y/Z anisotropy.

 

F4BTMS350 DK3.5 with RTF low-roughness copper foil High-Reliability Laminate and Custom 2layer PCB Solutions

 

F4BTMS350 is positioned as a high-reliability material suitable for aerospace applications and is designed to replace similar imported products. It offers stable dielectric constant and low loss across a wide frequency range—from 0.5 GHz to 40 GHz—making it well suited to phase-sensitive antennas, phased array systems, feed networks, and other RF/microwave circuits.

The F4BTMS series comes standard with RTF low-roughness copper foil, which helps reduce conductor loss while providing good peel strength. Aluminum-backed and copper-backed variants are also available for shielding or heat dissipation.

 

 

Key Properties at a Glance (F4BTMS350):

Property Typical Value Test Condition
Dielectric Constant (Dk) 3.50 ± 0.05 10 GHz
Dissipation Factor 0.0016 (10 GHz) / 0.0019 (20 GHz) / 0.0024 (40 GHz) 10/20/40 GHz
Temperature Coefficient of Dk -39 ppm/°C -55°C to +150°C
CTE - X / Y / Z 10 / 12 / 20 ppm/°C -55°C to +288°C
Thermal Conductivity 0.6 W/m·K Z-direction
Moisture Absorption 0.03% 20±2°C, 24 hours
Long-Term Operating Temperature -55°C to +260°C —
Flammability Rating UL 94 V-0 —
Copper Peel Strength >1.2 N/mm 1 oz RTF foil
Density 2.3 g/cm³ Room temperature

 

 

Applications

  1. Aerospace Equipment, Space and Cabin Systems
  2. Microwave and RF Circuitry
  3. Radar and Military Radar Systems
  4. Feed Networks
  5. Phase-Sensitive Antennas and Phased Array Antennas
  6. Satellite Communications

 

 

Custom PCB Manufacturing on F4BTMS350

As a specialized manufacturer of high-frequency printed circuit boards, we offer fabrication services using F4BTMS350 and other advanced laminate materials. The following specification details a representative 2-layer rigid PCB implementation:

 

F4BTMS350 DK3.5 with RTF low-roughness copper foil High-Reliability Laminate and Custom 2layer PCB Solutions

 

PCB Construction Details:

Parameter Specification
Base Material F4BTMS350
Layer Count 2-layer rigid
Board Dimensions 38.35 mm × 101.66 mm per panel, ±0.15 mm
Finished Thickness 1.3 mm
Copper Weight 1 oz (35 μm) outer layers
Minimum Trace/Space 6 / 9 mils
Minimum Hole Size 0.4 mm
Via Structure No blind or buried vias
Via Plating Thickness 20 μm
Surface Finish EPIG (Electroless Palladium Immersion Gold)
Solder Mask Green, top side only
Silkscreen White, top side only
Electrical Test 100% prior to shipment
Artwork Format Gerber RS-274-X
Quality Standard IPC-Class-2

 

 

Stable Dielectric Performance Across Frequency:
F4BTMS350 maintains a stable dielectric constant and low dissipation factor from 0.5 GHz to 40 GHz. The Dk of 3.50 ± 0.05 at 10 GHz supports repeatable impedance control, while the low loss values—0.0016 at 10 GHz, 0.0019 at 20 GHz, and 0.0024 at 40 GHz—help preserve signal integrity in high-frequency transmission lines.

 

Excellent Temperature Stability:
The temperature coefficient of Dk is approximately -39 ppm/°C over -55°C to +150°C, supporting stable phase and frequency performance in phase-sensitive antenna and phased array applications. The long-term operating temperature range extends from -55°C to +260°C.

 

Low CTE and High Dimensional Stability:
CTE values of 10 ppm/°C in X, 12 ppm/°C in Y, and 20 ppm/°C in Z over -55°C to +288°C contribute to good dimensional thermal stability and reliable plated-through-hole performance. The material also offers excellent dimensional stability for fine-line and high-density hole processing.

 

Reduced Glass-Weave Effects:
The combination of ultra-thin, ultra-fine glass cloth and uniformly distributed nano-ceramic filler minimizes glass-weave effects and reduces X/Y/Z anisotropy, which is particularly important for phase-sensitive and high-frequency designs.

 

Low Loss with Standard RTF Copper:
F4BTMS350 is supplied with RTF low-roughness copper foil as standard, reducing conductor loss while maintaining good peel strength (>1.2 N/mm with 1 oz RTF foil). This makes the material suitable for low-loss feed networks and high-performance antenna systems.

 

Aerospace-Oriented Reliability:
The material offers excellent radiation resistance, low outgassing suitable for space applications, low moisture absorption of 0.03%, and UL 94 V-0 flammability rating. It also provides high electrical strength (>42 kV/mm in Z direction) and breakdown voltage (>55 kV in X/Y direction).

 

Thermal Performance:
With thermal conductivity of 0.6 W/m·K in the Z direction, F4BTMS350 supports heat removal in higher-power RF applications. The material passes thermal stress testing at 260°C for 10 seconds, three times, without delamination.

 

Processing and Design Considerations

  • Fabrication: F4BTMS350 can be processed using standard PTFE PCB fabrication techniques. It is suitable for multilayer, high-layer-count, and backplane processing, and performs well in dense-hole and fine-line applications.

 

  • Copper Foil: RTF low-roughness copper foil is standard. Available copper thicknesses include 0.5 oz (0.018 mm) and 1 oz (0.035 mm); other thicknesses are available on request.

 

  • Backing Options: Aluminum-backed (F4BTMS350-AL) and copper-backed (F4BTMS350-CU) variants are available for shielding or heat dissipation.

 

  • Thickness Options: F4BTMS350 is available from 0.254 mm minimum, with thicknesses offered in multiples of 0.127 mm. Standard thicknesses include 0.254 mm, 0.508 mm, 0.635 mm, 0.762 mm, 1.016 mm, 1.27 mm, 1.524 mm, 2.54 mm, and others up to 6.35 mm.

 

  • Panel Sizes: Standard panel sizes include 305 × 460 mm, 460 × 610 mm, and 610 × 920 mm; custom sizes are available.

 

Quality and Availability

All boards are manufactured in compliance with IPC-Class-2 quality standards. 100% electrical testing is performed prior to shipment to ensure functional integrity.

 

Our production capability extends to worldwide availability, with flexible logistics support for both prototype and volume requirements. We offer rapid turnaround and competitive pricing while maintaining strict process control.

 

For inquiries about custom stack-ups, panel sizes, copper foil options, aluminum or copper backing, or other configurations, please contact our sales engineering team—we are ready to support your high-frequency circuit board requirements.

 

You Might Be Into These
Get in touch with us

Enter Your Message

sales30@bichengpcb.com
+8618277967574
BTL_SallyMao
.cid.455f73688e64dff1
431959212
86-755-27374847