RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203
TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350
![]() |
Rogers' TC350 is a woven fiberglass reinforced, ceramic filled, PTFE based composite for use as making printed circuit board.TC350 is designed to provide enhanced heat-transfer through “Best-In-Class” thermal conductivity, while reducing dielectric loss and insertion loss. Lower losses result in ... Read More
|
![]() |
General Description RO4534 High Frequency Laminates are ceramic-filled, glass-reinforced hydrocarbon based material which are cost/performance materials from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. It has a dielectric constant ... Read More
|
![]() |
RO4835 PCB High Frequency Circuit Board Double Layer 60mil 1.524mm Rogers 4835 PCB With Immersion Gold General Description This is a type of Rogers high frequency PCB built on RO4835 laminates, double layers with signal layer on top side, shielding layer on bottom side. It is plated with immersion ... Read More
|
![]() |
Hi Everyone, Today, we’re going to talk about a type of printed circuit board on low loss ceramic-fill PTFE: TRF-45 high frequency PCB. TRF-45 is a new generation of low-loss, thermally-stable PCB material with Dk (Dielectric Constant) 4.5 +/- 0.15, Df (Dissipation Factor) 0.0035, Thermal Conductivi... Read More
|
![]() |
RF-60A is an organic-ceramic laminate in the ORganic CERamic(ORCER) family of Taconic products. It's based on woven glass reinforcement. It is a result of Taconic's expertise in both ceramic fill technology and in coated PTFE fiberglass. RF-60A exhibits exceptional interlaminar bond strength and ... Read More
|
![]() |
AD1000 PCB High Frequency PCB 30mil 0.765mm Double Sided RF PCB DK 10.2 PWB with Immersion Gold Brief Introduction This type of immersion gold RF PCB is made on AD1000 material, PTFE/Woven Fiberglass/Ceramic Filled Laminate. The circuit board is dual layers with finished 1oz copper. No solder mask ... Read More
|
![]() |
RF-35 PCB High Frequency Printed Circuit Board 30mil 1.524mm Double Sided RF PCB with Immersion Gold and Black Solder Mask (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Brief Introduction This is a type of ORCER (Organic Ceramic) RF-35 ... Read More
|
![]() |
RF-45 PCB High Frequency Printed Circuit Board Taconic DK4.5 RF PCB with Immersion Silver Thickness 20mil 31mil 62mil 125mi RF-45 is ceramic filled PTFE resin laminate utilizing woven fiberglass as reinforcement. It’s a kind of low loss laminate alternative to FR-4, dielectric constant (DK) flat ... Read More
|
![]() |
General Description Rogers' TMM6 thermoset microwave laminates are ceramic, hydrocarbon, thermoset polymer composites designed for high PTH reliability stripline and microstrip applications. It has the dielectric constant of 6.0 and dissipation factor of 0.0023. TMM6 has an exceptionally low thermal ... Read More
|
![]() |
General Description Taconic's RF-10 laminates are composites of ceramic filled PTFE and woven fiberglass, which have the advantage of high dielectric constant (10.2 10GHz) and low dissipation factor (0.0025 10GHz). Thin woven fiberglass reinforcement is used to offer both low dielectric loss and ... Read More
|