Bicheng Newly shipped PCB factory, Buy good quality Bicheng Newly shipped PCB Products from China

Contact Person : Sally Mao

Phone Number : 86-755-27374847

WhatsApp : +8618277967574

Best Products

RO3010 2-Layer PCB built on 20mil laminate material with Immersion Silver Finish

Contact Now

Rogers AD250C Multi-layer PCB 4 layer copper 1.8mm thickness with Immersion Tin Finish

Contact Now

fabricate double sided hydrocarbon ceramic PCB 30mil Kappa 438 2-Layer PCB with ENIG Finish

Contact Now

's M6 material 14-Layer high-speed, low-loss laminate M6 multi layer hybrid PCB with Multi-Point Impedance Control
Contact Now
High-Frequency Hybrid Stack-Up: Engineering an 8-Layer Board with RO4350B, FR-4, and Sequential Lamination
Contact Now
4-Layer Hybrid High-Frequency PCB – RT/duroid 5880 + FR4 (Immersion Gold, Controlled Depth Trench)
Contact Now
4-Layer Hybrid High-Frequency PCB – RO4003C + FR4 (Immersion Gold) Copper Clad Laminates
Contact Now
Unveiling the High-Performance Two-Layer FPC with RA Copper and Green Solder Mask
Contact Now
ultra high DK20 2-Layer rigid TP2000 PCB ceramic-filled polyphenylene oxide (PPO) resin (6.1mm Thick, Bare Copper)
Contact Now
Fabricated with TF600 DK6.0 modified PTFE/ceramic composite laminate 0.7mm (25mil) RF microwave PCB
Contact Now
custom manufacture 2-Layer RT/duroid 5870 High-Frequency PCB – 10mil (0.3mm) laminate with ENIG Finish
Contact Now
Fabricated microwave material Dk (12.85) 150mil 2-Layer TMM13i High-Frequency PCB – 150mil (3.9mm) with OSP Finish
Contact Now
Taconic TRF-45 Dk 4.5 ceramic-filled PTFE laminate 2-Layer High-Frequency PCB – 32mil (0.9mm) with Immersion Gold Finish
Contact Now
Custom design 4-Layer Hybrid High-Frequency DK3.3 PCB – WL-CT330 + High-Tg FR-4 (S1000-2M) substrate
Contact Now
Fabricated with RF-30A laminate Dk 3.0 2-Layer High-Frequency PCB – 20mil (0.6mm) with ENIG Finish
Contact Now
Custom engineered design 2-Layer RT/duroid 6002 High-Frequency PCB – 30mil (0.8mm) with Immersion Silver Finish
Contact Now
Rogers TMM10 High-Dk 9.2 manufacture 2-Layer PCB Design using 15mil (0.381mm) core laminate
Contact Now
Custom Design manufacture 2-Layer RO3010 High-Frequency PCB (50mil / 1.3mm) – EPIG Finish
Contact Now
Fabrication of a Multilayer PCB Utilising TC350 and FR408HR Laminates with Advanced Via and Edge Plating Techniques
Contact Now

RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203

TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350

Bicheng Newly shipped PCB(325)

Rogers PCB Board(59)

Taconic PCB Board(39)

PTFE PCB Board(18)

Flexible Printed Circuit(35)

Multilayer PCB Board(16)

High Temperature PCB(8)

HDI PCB Board(11)

Impedance Controlled PCB(4)

PCB Prototypes(17)

Antenna PCB(198)

Arlon PCB Board(21)

Hybrid PCB Board(16)

FR-4 PCB Board(23)

High Frequency PCB(114)

F4B SERIES PCBS(19)

RF PCB(64)

Copper Clad Laminates(42)

's M6 material 14-Layer high-speed, low-loss laminate M6 multi layer hybrid PCB with Multi-Point Impedance Control

High-Frequency Hybrid Stack-Up: Engineering an 8-Layer Board with RO4350B, FR-4, and Sequential Lamination

4-Layer Hybrid High-Frequency PCB – RT/duroid 5880 + FR4 (Immersion Gold, Controlled Depth Trench)

4-Layer Hybrid High-Frequency PCB – RO4003C + FR4 (Immersion Gold) Copper Clad Laminates

Unveiling the High-Performance Two-Layer FPC with RA Copper and Green Solder Mask

ultra high DK20 2-Layer rigid TP2000 PCB ceramic-filled polyphenylene oxide (PPO) resin (6.1mm Thick, Bare Copper)

Fabricated with TF600 DK6.0 modified PTFE/ceramic composite laminate 0.7mm (25mil) RF microwave PCB

custom manufacture 2-Layer RT/duroid 5870 High-Frequency PCB – 10mil (0.3mm) laminate with ENIG Finish

Fabricated microwave material Dk (12.85) 150mil 2-Layer TMM13i High-Frequency PCB – 150mil (3.9mm) with OSP Finish

Taconic TRF-45 Dk 4.5 ceramic-filled PTFE laminate 2-Layer High-Frequency PCB – 32mil (0.9mm) with Immersion Gold Finish

Custom design 4-Layer Hybrid High-Frequency DK3.3 PCB – WL-CT330 + High-Tg FR-4 (S1000-2M) substrate

Fabricated with RF-30A laminate Dk 3.0 2-Layer High-Frequency PCB – 20mil (0.6mm) with ENIG Finish

Custom engineered design 2-Layer RT/duroid 6002 High-Frequency PCB – 30mil (0.8mm) with Immersion Silver Finish

Rogers TMM10 High-Dk 9.2 manufacture 2-Layer PCB Design using 15mil (0.381mm) core laminate

Custom Design manufacture 2-Layer RO3010 High-Frequency PCB (50mil / 1.3mm) – EPIG Finish

Fabrication of a Multilayer PCB Utilising TC350 and FR408HR Laminates with Advanced Via and Edge Plating Techniques

RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203

TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350

Bicheng Newly shipped PCB

's M6 material 14-Layer high-speed, low-loss laminate M6 multi layer hybrid PCB with Multi-Point Impedance Control

High-Frequency Hybrid Stack-Up: Engineering an 8-Layer Board with RO4350B, FR-4, and Sequential Lamination

4-Layer Hybrid High-Frequency PCB – RT/duroid 5880 + FR4 (Immersion Gold, Controlled Depth Trench)

4-Layer Hybrid High-Frequency PCB – RO4003C + FR4 (Immersion Gold) Copper Clad Laminates

Unveiling the High-Performance Two-Layer FPC with RA Copper and Green Solder Mask

ultra high DK20 2-Layer rigid TP2000 PCB ceramic-filled polyphenylene oxide (PPO) resin (6.1mm Thick, Bare Copper)

Fabricated with TF600 DK6.0 modified PTFE/ceramic composite laminate 0.7mm (25mil) RF microwave PCB

custom manufacture 2-Layer RT/duroid 5870 High-Frequency PCB – 10mil (0.3mm) laminate with ENIG Finish

Fabricated microwave material Dk (12.85) 150mil 2-Layer TMM13i High-Frequency PCB – 150mil (3.9mm) with OSP Finish

Taconic TRF-45 Dk 4.5 ceramic-filled PTFE laminate 2-Layer High-Frequency PCB – 32mil (0.9mm) with Immersion Gold Finish

Custom design 4-Layer Hybrid High-Frequency DK3.3 PCB – WL-CT330 + High-Tg FR-4 (S1000-2M) substrate

Fabricated with RF-30A laminate Dk 3.0 2-Layer High-Frequency PCB – 20mil (0.6mm) with ENIG Finish

Custom engineered design 2-Layer RT/duroid 6002 High-Frequency PCB – 30mil (0.8mm) with Immersion Silver Finish

Rogers TMM10 High-Dk 9.2 manufacture 2-Layer PCB Design using 15mil (0.381mm) core laminate

Custom Design manufacture 2-Layer RO3010 High-Frequency PCB (50mil / 1.3mm) – EPIG Finish

Fabrication of a Multilayer PCB Utilising TC350 and FR408HR Laminates with Advanced Via and Edge Plating Techniques

RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203 TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350

RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203

TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350