Rogers RO4535 DK3.44 Cost-Performance Antenna Laminate and Custom 2-layer copper clad 60mil substrate with immersion Gold PCB for RF Microwave applications
Contact Person : Sally Mao
Phone Number : 86-755-27374847
WhatsApp : +8618277967574
Product Description
Rogers TMM13i is a ceramic, hydrocarbon, thermoset polymer composite from the TMM® series, specifically tailored for high-reliability plated-through-hole stripline and microstrip applications. Unlike traditional PTFE-based materials, TMM laminates are based on thermoset resins, meaning they do not soften when heated. This allows for reliable wire bonding of component leads to circuit traces without concerns of pad lifting or substrate deformation.
![]()
TMM13i features an isotropic dielectric constant and integrates the advantageous electrical and mechanical properties of both ceramic and PTFE substrates, while allowing for the convenience of soft substrate processing methods. The material does not require a sodium naphthanate treatment prior to electroless plating and is fully compatible with all common printed wiring board (PWB) processes.
Key Properties at a Glance (TMM13i):
| Property | Typical Value | Test Condition |
| Dielectric Constant (Dk) | 12.85 ± 0.35 | 10 GHz |
| Dissipation Factor | 0.0019 | 10 GHz |
| Thermal Coefficient of Dk | -70 ppm/°K | -55°C to +125°C |
| CTE - X / Y / Z | 19 / 19 / 20 ppm/°C | -55°C to +288°C |
| Decomposition Temperature (Td) | 425°C | TGA |
| Thermal Conductivity | 0.76 W/m·K | 80°C |
| Moisture Absorption | 0.13% – 0.16% | D/24/23 |
| Flammability Rating | UL 94 V-0 | — |
| Lead-Free Process Compatible | Yes | — |
Applications
Because of its high dielectric constant (Dk ~12.85), TMM13i is an excellent candidate to replace alumina substrates in demanding RF and microwave designs. Typical applications include:
Custom PCB Manufacturing on TMM13i
As a specialized manufacturer of high-frequency printed circuit boards, we offer fabrication services using Rogers TMM13i and other advanced laminate materials. The following specification details a representative 2-layer rigid PCB implementation:
![]()
PCB Construction Details:
| Parameter | Specification |
| Base Material | Rogers TMM13i |
| Layer Count | 2-layer rigid |
| Board Dimensions | 47.1 mm × 88.9 mm per panel |
| Finished Thickness | 2 mm |
| Copper Weight | 1 oz (35 μm) outer layers |
| Minimum Trace/Space | 4 / 6 mils |
| Minimum Hole Size | 0.25 mm |
| Via Structure | No blind or buried vias |
| Via Plating Thickness | 20 μm |
| Surface Finish | OSP (Organic Solderability Preservative) |
| Solder Mask | Green, top side only |
| Silkscreen | White, top side only |
| Electrical Test | 100% prior to shipment |
| Artwork Format | Gerber RS-274-X |
| Quality Standard | IPC-Class-2 |
Material Advantages
Ceramic-like Performance with Soft-Substrate Processing:
TMM13i combines the high Dk and low loss typically associated with ceramic substrates with the ease of standard PCB fabrication. It is resistant to etchants and solvents used in printed circuit production, reducing damage during fabrication and assembly processes.
Thermoset Resin for Reliable Assembly:
The thermoset resin base ensures the material does not soften when heated, allowing for highly reliable wire-bonding without pad lifting or substrate deformation.
CTE Matched to Copper:
The isotropic coefficients of thermal expansion (19 ppm/°C in X and Y, 20 ppm/°C in Z) are very closely matched to copper. This minimizes stress on plated through-holes, ensuring high reliability and low etch shrinkage values.
Exceptional Thermal Management:
TMM laminates have a thermal conductivity approximately twice that of traditional PTFE/ceramic laminates (0.76 W/m·K for TMM13i). This facilitates heat removal, making the material ideal for higher-power RF applications.
Low Thermal Coefficient of Dk:
The thermal coefficient of dielectric constant is exceptionally low (-70 ppm/°K), ensuring that electrical performance remains stable even under fluctuating operating temperatures.
No Specialized Pre-treatment Required:
TMM13i does not require the sodium naphthanate treatment that is standard for PTFE-based materials prior to electroless plating, streamlining the manufacturing process.
Processing and Design Considerations
Quality and Availability
All boards are manufactured in compliance with IPC-Class-2 quality standards. 100% electrical testing is performed prior to shipment to ensure functional integrity.
Our production capability extends to worldwide availability, with flexible logistics support for both prototype and volume requirements. We offer rapid turnaround and competitive pricing while maintaining strict process control.
For inquiries about custom stack-ups, panel sizes, copper foil options, heavy metal cladding, or other configurations, please contact our sales engineering team—we are ready to support your high-frequency circuit board requirements.
Enter Your Message