MOQ: | 1 |
Price: | USD9.99~99.99 |
Standard Packaging: | Vacuum |
Delivery Period: | 5-6 working days |
Payment Method: | T/T, Paypal |
Supply Capacity: | 45000 pieces per month |
3 Layer High Frequency PCB Built On 60mil RO4350B and 6.6mil RO4350B with ENIG for Wireless Booster
(PCB’s are custom-made products, the picture and parameters shown are just for reference)
Hi Everyone,
Multilayer high frequency PCBs are made from all high frequency material inclusive of prepreg adhesive. For example, a 4-layer RO4350B PCB is a compound of 2 cores of RO4350B substrates. As is known to all, there’re 8 cores in RO4350B family, i.e. 4mil (0.101mm) to 60mil (1.524mm).
RO4350B: | |
4mil | 0.101mm |
6.6mil | 0.168mm |
10mil | 0.254mm |
13.3mil | 0.338mm |
16.6mil | 0.422mm |
20mil | 0.508mm |
30mil | 0.762mm |
60mil | 1.524mm |
So it’s very interesting that stack-up of 4 layers can be done in many different ways.
This 3-Layer high frequency PCB is built on 2 cores of RO4350B and one layer of copper is etched off, left 3 layers on.
The structure is one sheet of 60mil RO4350B plus 4mil RO4450F prepreg and combined 6.6mil RO4350B. The board is a square with 110mm x 110mm, with immersion gold finishes on pads. They’re 20 pieces packed for shipment and used for wireless booster.
Following is the actual value in engineering manufacture.
Features and benefits
1) Excellent high frequency performance due to low dielectric tolerance and loss;
2) Reducing signal loss in high frequency application meets the development needs of communication technology;
3) Professional and experienced engineers check your production files
4) Hassle-free, one-to-one after-sales service;
5) UL, ISO14001, IAFT16949 certified factory.
Applications
Amplifier, Antenna combiner, Frequency converter, Trunk amplifier, RF module, Power splitter, Low Noise Block, 4G antenna
Parameter and data sheet
PCB SIZE | 110 x 110mm=1PCS |
BOARD TYPE | Multilayer PCB |
Number of Layers | 3 layers |
Surface Mount Components | YES |
Through Hole Components | YES |
LAYER STACKUP | copper ------- 35µm(1 oz)+plate TOP layer |
RO4350B 60mil (1.524mm) | |
copper ------- 35µm | |
Prepreg RO4450F 4mil (0.102mm) | |
copper ------- 0µm | |
RO4350B 6.6mil (0.167mm) | |
copper ------- 35µm(1oz) + plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 4 mil / 4 mil |
Minimum / Maximum Holes: | 0.4 mm / 3.5 mm |
Number of Different Holes: | 12 |
Number of Drill Holes: | 124 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | NO |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | RO4350B Tg280℃, er<3.48, Rogers Corp |
Final foil external: | 1 oz |
Final foil internal: | 1 oz |
Final height of PCB: | 1.88 mm ±10% |
PLATING AND COATING | |
Surface Finish | Immersion gold |
Solder Mask Apply To: | N/A |
Solder Mask Color: | N/A |
Solder Mask Type: | N/A |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | N/A |
Colour of Component Legend | N/A |
Manufacturer Name or Logo: | N/A |
VIA | Plated through hole(PTH), minimum size 0.4mm. |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" |
Board plating: | 0.0029" |
Drill tolerance: | 0.002" |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Our Quality Policy
Bicheng has developed series of management procedures and approaches to assure that PCBs are in compliance with the customers' requirements, inclusive of selection of the vendors, work in progress (WIP) inspection, outgoing delivery inspection and customer service etc.
Evaluation and Audit of Suppliers
Suppliers have to be evaluated by Bicheng. In addition, Bicheng will appraise and rank suppliers every year to guarantee the materials supplied are meeting Bicheng’s requirements. Furthermore, Bicheng continuously develop suppliers and supervise them to improve their quality and environment management basing on the systems of ISO9001 & ISO14001.
Contract Evaluation
Bicheng shall review and verify customer's requirements to make sure that we have the capability to satisfy customers' requirements including specifications, delivery and other demands prior to accepting an order.
Making, audit and control of manufacturing data.
When customers' design data and specifications are provided to our market department, Bicheng has to verify all the requirements. Then, convert the design data into manufacturing data by CAM. Finally, a manufacturing instruction (MI) is generated according to the real manufacturing process and technologies for manufacturing department as the basis for actual fabrication. MI must be reviewed by independent engineers and QA engineers before issue.
Incoming Material Quality Control
All materials have to be inspected before warehousing. We established a series of strict inspection procedure and instruction to control the incoming materials. Furthermore, various precise inspecting instruments and apparatus guarantee the capability to judge the material good or not. We issue material with first in first out principle, and give out “alarm” for the material that will reach the shelf life to ensure the materials are used up before expiry.
Control of Production Process
Right manufacturing instruction (MI), comprehensive equipment management and maintenance and process control, strict WIP inspection and monitoring as well as working instruction, all those make the whole fabrication process totally controlled.
Final Control and Inspection
All PCBs have to be gone through the open and short test as well as visual inspection after passed the specified physical tests. We own various advanced test equipment including customized, probe flying test machines to guarantee that each PCB is 100% tested.
Product Delivery Audit
We set up a dedicated FQA department to inspect the PCB products according to the customer's specifications and requirements by sampling. Qualified PCBs are going to be packed.
FQA also has to carry out a 100% audit of the warehouse packing and shipping products, including product number, customer number, product quantity, shipping address and so on prior to shipment.
Customer Service
We sets up a professional customer service team to proactively communicate with customers and timely deal with the customers' feedbacks. We highly focus on customers' needs and to understand customers’ demands, timely to adjust the policy of customer service and PCB product requirements.
MOQ: | 1 |
Price: | USD9.99~99.99 |
Standard Packaging: | Vacuum |
Delivery Period: | 5-6 working days |
Payment Method: | T/T, Paypal |
Supply Capacity: | 45000 pieces per month |
3 Layer High Frequency PCB Built On 60mil RO4350B and 6.6mil RO4350B with ENIG for Wireless Booster
(PCB’s are custom-made products, the picture and parameters shown are just for reference)
Hi Everyone,
Multilayer high frequency PCBs are made from all high frequency material inclusive of prepreg adhesive. For example, a 4-layer RO4350B PCB is a compound of 2 cores of RO4350B substrates. As is known to all, there’re 8 cores in RO4350B family, i.e. 4mil (0.101mm) to 60mil (1.524mm).
RO4350B: | |
4mil | 0.101mm |
6.6mil | 0.168mm |
10mil | 0.254mm |
13.3mil | 0.338mm |
16.6mil | 0.422mm |
20mil | 0.508mm |
30mil | 0.762mm |
60mil | 1.524mm |
So it’s very interesting that stack-up of 4 layers can be done in many different ways.
This 3-Layer high frequency PCB is built on 2 cores of RO4350B and one layer of copper is etched off, left 3 layers on.
The structure is one sheet of 60mil RO4350B plus 4mil RO4450F prepreg and combined 6.6mil RO4350B. The board is a square with 110mm x 110mm, with immersion gold finishes on pads. They’re 20 pieces packed for shipment and used for wireless booster.
Following is the actual value in engineering manufacture.
Features and benefits
1) Excellent high frequency performance due to low dielectric tolerance and loss;
2) Reducing signal loss in high frequency application meets the development needs of communication technology;
3) Professional and experienced engineers check your production files
4) Hassle-free, one-to-one after-sales service;
5) UL, ISO14001, IAFT16949 certified factory.
Applications
Amplifier, Antenna combiner, Frequency converter, Trunk amplifier, RF module, Power splitter, Low Noise Block, 4G antenna
Parameter and data sheet
PCB SIZE | 110 x 110mm=1PCS |
BOARD TYPE | Multilayer PCB |
Number of Layers | 3 layers |
Surface Mount Components | YES |
Through Hole Components | YES |
LAYER STACKUP | copper ------- 35µm(1 oz)+plate TOP layer |
RO4350B 60mil (1.524mm) | |
copper ------- 35µm | |
Prepreg RO4450F 4mil (0.102mm) | |
copper ------- 0µm | |
RO4350B 6.6mil (0.167mm) | |
copper ------- 35µm(1oz) + plate BOT Layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 4 mil / 4 mil |
Minimum / Maximum Holes: | 0.4 mm / 3.5 mm |
Number of Different Holes: | 12 |
Number of Drill Holes: | 124 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | NO |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | RO4350B Tg280℃, er<3.48, Rogers Corp |
Final foil external: | 1 oz |
Final foil internal: | 1 oz |
Final height of PCB: | 1.88 mm ±10% |
PLATING AND COATING | |
Surface Finish | Immersion gold |
Solder Mask Apply To: | N/A |
Solder Mask Color: | N/A |
Solder Mask Type: | N/A |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | N/A |
Colour of Component Legend | N/A |
Manufacturer Name or Logo: | N/A |
VIA | Plated through hole(PTH), minimum size 0.4mm. |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" |
Board plating: | 0.0029" |
Drill tolerance: | 0.002" |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Our Quality Policy
Bicheng has developed series of management procedures and approaches to assure that PCBs are in compliance with the customers' requirements, inclusive of selection of the vendors, work in progress (WIP) inspection, outgoing delivery inspection and customer service etc.
Evaluation and Audit of Suppliers
Suppliers have to be evaluated by Bicheng. In addition, Bicheng will appraise and rank suppliers every year to guarantee the materials supplied are meeting Bicheng’s requirements. Furthermore, Bicheng continuously develop suppliers and supervise them to improve their quality and environment management basing on the systems of ISO9001 & ISO14001.
Contract Evaluation
Bicheng shall review and verify customer's requirements to make sure that we have the capability to satisfy customers' requirements including specifications, delivery and other demands prior to accepting an order.
Making, audit and control of manufacturing data.
When customers' design data and specifications are provided to our market department, Bicheng has to verify all the requirements. Then, convert the design data into manufacturing data by CAM. Finally, a manufacturing instruction (MI) is generated according to the real manufacturing process and technologies for manufacturing department as the basis for actual fabrication. MI must be reviewed by independent engineers and QA engineers before issue.
Incoming Material Quality Control
All materials have to be inspected before warehousing. We established a series of strict inspection procedure and instruction to control the incoming materials. Furthermore, various precise inspecting instruments and apparatus guarantee the capability to judge the material good or not. We issue material with first in first out principle, and give out “alarm” for the material that will reach the shelf life to ensure the materials are used up before expiry.
Control of Production Process
Right manufacturing instruction (MI), comprehensive equipment management and maintenance and process control, strict WIP inspection and monitoring as well as working instruction, all those make the whole fabrication process totally controlled.
Final Control and Inspection
All PCBs have to be gone through the open and short test as well as visual inspection after passed the specified physical tests. We own various advanced test equipment including customized, probe flying test machines to guarantee that each PCB is 100% tested.
Product Delivery Audit
We set up a dedicated FQA department to inspect the PCB products according to the customer's specifications and requirements by sampling. Qualified PCBs are going to be packed.
FQA also has to carry out a 100% audit of the warehouse packing and shipping products, including product number, customer number, product quantity, shipping address and so on prior to shipment.
Customer Service
We sets up a professional customer service team to proactively communicate with customers and timely deal with the customers' feedbacks. We highly focus on customers' needs and to understand customers’ demands, timely to adjust the policy of customer service and PCB product requirements.