MOQ: | 1 |
Price: | USD 9.99-99.99 |
Standard Packaging: | Vacuum |
Delivery Period: | 10 working days |
Payment Method: | T/T, Paypal |
Supply Capacity: | 50000 pieces per month |
Rogers TMM4 Microwave PCB for RF and Microwave Circuitry | TMM3, TMM6, TMM10, TMM10i, TMM13i PCB
(PCB's are custom-made products, the picture and parameters shown are just for reference)
Rogers TMM4 thermoset microwave material is ceramic, hydrocarbon, thermoset polymer composite designed for high plated-through-hole reliability stripline and microstrip applications. It's available with dielectric constant at 4.70. The electrical and mechanical properties of TMM4 combine many of the benefits of both ceramic and traditional PTFE microwave circuit materials, without requiring the specialized production techniques. It does not require a sodium napthanate treatment prior to electroless plating.
TMM4 has an exceptionally low thermal coefficient of dielectric constant, typically less than 30 PPM/°C. The material’s isotropic coefficient of thermal expansion, very closely matched to copper, allows for production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM4 is approximately twice that of traditional PTFE/ceramic materials, facilitating heat removal.
TMM4 is based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation.
Our Capability (TMM4)
PCB Material: | Composite of Ceramic, hydrocarbon and thermoset polymer |
Designator: | TMM4 |
Dielectric constant: | 4.5 ±0.045 (process); 4.7 (design) |
Layer count: | 1 Layer, 2 Layer |
Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
PCB thickness: | 15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil (0.762mm), 50mil (1.270mm), 60mil (1.524mm), 75mil (1.905mm), 100mil (2.540mm), 125mil (3.175mm) etc. |
PCB size: | ≤400mm X 500mm |
Solder mask: | Green, Black, Blue, Yellow, Red etc. |
Surface finish: | Bare copper, HASL, ENIG, Immersion tin, OSP. |
Main Applications are as follows:
Chip testers
Dielectric polarizers and lenses
Filters and coupler
Global Positioning Systems Antennas
Patch Antennas
Power amplifiers and combiners
RF and microwave circuitry
Satellite communication systems
Data Sheet of TMM4
TMMY Type Value | ||||||
Property | TMM4 | Direction | Units | Condition | Test Method | |
Dielectric Constant,εProcess | 4.5±0.045 | Z | 10 GHz | IPC-TM-650 2.5.5.5 | ||
Dielectric Constant,εDesign | 4.7 | - | - | 8GHz to 40 GHz | Differential Phase Length Method | |
Dissipation Factor (process) | 0.002 | Z | - | 10 GHz | IPC-TM-650 2.5.5.5 | |
Thermal Coefficient of dielectric constant | +15 | - | ppm/°K | -55℃-125℃ | IPC-TM-650 2.5.5.5 | |
Insulation Resistance | >2000 | - | Gohm | C/96/60/95 | ASTM D257 | |
Volume Resistivity | 6 x 108 | - | Mohm.cm | - | ASTM D257 | |
Surface Resistivity | 1 x 109 | - | Mohm | - | ASTM D257 | |
Electrical Strength(dielectric strength) | 371 | Z | V/mil | - | IPC-TM-650 method 2.5.6.2 | |
Thermal Properties | ||||||
Decompositioin Temperature(Td) | 425 | 425 | ℃TGA | - | ASTM D3850 | |
Coefficient of Thermal Expansion - x | 16 | X | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Y | 16 | Y | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Z | 21 | Z | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Thermal Conductivity | 0.7 | Z | W/m/K | 80 ℃ | ASTM C518 | |
Mechanical Properties | ||||||
Copper Peel Strength after Thermal Stress | 5.7 (1.0) | X,Y | lb/inch (N/mm) | after solder float 1 oz. EDC | IPC-TM-650 Method 2.4.8 | |
Flexural Strength (MD/CMD) | 15.91 | X,Y | kpsi | A | ASTM D790 | |
Flexural Modulus (MD/CMD) | 1.76 | X,Y | Mpsi | A | ASTM D790 | |
Physical Properties | ||||||
Moisture Absorption (2X2) | 1.27mm (0.050") | 0.07 | - | % | D/24/23 | ASTM D570 |
3.18mm (0.125") | 0.18 | |||||
Specific Gravity | 2.07 | - | - | A | ASTM D792 | |
Specific Heat Capacity | 0.83 | - | J/g/K | A | Calculated | |
Lead-Free Process Compatible | YES | - | - | - | - |
MOQ: | 1 |
Price: | USD 9.99-99.99 |
Standard Packaging: | Vacuum |
Delivery Period: | 10 working days |
Payment Method: | T/T, Paypal |
Supply Capacity: | 50000 pieces per month |
Rogers TMM4 Microwave PCB for RF and Microwave Circuitry | TMM3, TMM6, TMM10, TMM10i, TMM13i PCB
(PCB's are custom-made products, the picture and parameters shown are just for reference)
Rogers TMM4 thermoset microwave material is ceramic, hydrocarbon, thermoset polymer composite designed for high plated-through-hole reliability stripline and microstrip applications. It's available with dielectric constant at 4.70. The electrical and mechanical properties of TMM4 combine many of the benefits of both ceramic and traditional PTFE microwave circuit materials, without requiring the specialized production techniques. It does not require a sodium napthanate treatment prior to electroless plating.
TMM4 has an exceptionally low thermal coefficient of dielectric constant, typically less than 30 PPM/°C. The material’s isotropic coefficient of thermal expansion, very closely matched to copper, allows for production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM4 is approximately twice that of traditional PTFE/ceramic materials, facilitating heat removal.
TMM4 is based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation.
Our Capability (TMM4)
PCB Material: | Composite of Ceramic, hydrocarbon and thermoset polymer |
Designator: | TMM4 |
Dielectric constant: | 4.5 ±0.045 (process); 4.7 (design) |
Layer count: | 1 Layer, 2 Layer |
Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
PCB thickness: | 15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil (0.762mm), 50mil (1.270mm), 60mil (1.524mm), 75mil (1.905mm), 100mil (2.540mm), 125mil (3.175mm) etc. |
PCB size: | ≤400mm X 500mm |
Solder mask: | Green, Black, Blue, Yellow, Red etc. |
Surface finish: | Bare copper, HASL, ENIG, Immersion tin, OSP. |
Main Applications are as follows:
Chip testers
Dielectric polarizers and lenses
Filters and coupler
Global Positioning Systems Antennas
Patch Antennas
Power amplifiers and combiners
RF and microwave circuitry
Satellite communication systems
Data Sheet of TMM4
TMMY Type Value | ||||||
Property | TMM4 | Direction | Units | Condition | Test Method | |
Dielectric Constant,εProcess | 4.5±0.045 | Z | 10 GHz | IPC-TM-650 2.5.5.5 | ||
Dielectric Constant,εDesign | 4.7 | - | - | 8GHz to 40 GHz | Differential Phase Length Method | |
Dissipation Factor (process) | 0.002 | Z | - | 10 GHz | IPC-TM-650 2.5.5.5 | |
Thermal Coefficient of dielectric constant | +15 | - | ppm/°K | -55℃-125℃ | IPC-TM-650 2.5.5.5 | |
Insulation Resistance | >2000 | - | Gohm | C/96/60/95 | ASTM D257 | |
Volume Resistivity | 6 x 108 | - | Mohm.cm | - | ASTM D257 | |
Surface Resistivity | 1 x 109 | - | Mohm | - | ASTM D257 | |
Electrical Strength(dielectric strength) | 371 | Z | V/mil | - | IPC-TM-650 method 2.5.6.2 | |
Thermal Properties | ||||||
Decompositioin Temperature(Td) | 425 | 425 | ℃TGA | - | ASTM D3850 | |
Coefficient of Thermal Expansion - x | 16 | X | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Y | 16 | Y | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Coefficient of Thermal Expansion - Z | 21 | Z | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
Thermal Conductivity | 0.7 | Z | W/m/K | 80 ℃ | ASTM C518 | |
Mechanical Properties | ||||||
Copper Peel Strength after Thermal Stress | 5.7 (1.0) | X,Y | lb/inch (N/mm) | after solder float 1 oz. EDC | IPC-TM-650 Method 2.4.8 | |
Flexural Strength (MD/CMD) | 15.91 | X,Y | kpsi | A | ASTM D790 | |
Flexural Modulus (MD/CMD) | 1.76 | X,Y | Mpsi | A | ASTM D790 | |
Physical Properties | ||||||
Moisture Absorption (2X2) | 1.27mm (0.050") | 0.07 | - | % | D/24/23 | ASTM D570 |
3.18mm (0.125") | 0.18 | |||||
Specific Gravity | 2.07 | - | - | A | ASTM D792 | |
Specific Heat Capacity | 0.83 | - | J/g/K | A | Calculated | |
Lead-Free Process Compatible | YES | - | - | - | - |