RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203
TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350
|Place of Origin:||China|
|Brand Name:||Bicheng Technologies Limited|
|Minimum Order Quantity:||1|
|Delivery Time:||10 working days|
|Supply Ability:||50000 pieces per month|
|Number Of Layers:||4 Layer, 6 Layer, Multilayer, Hybrid Type (Mixed)||Glass Epoxy:||RO4350B Rogers|
|Final Foil:||0.5oz (17 µm), 1oz (35µm), 2oz (70µm)||Final Height Of PCB:||1.0-5.0mm|
|Surface Finish:||Bare Copper, HASL, ENIG, Silver, OSP,etc.||Solder Mask Color:||Green, Black, Blue, Yellow, Red Etc.|
|Colour Of Component Legend:||Green, Black, Blue, Yellow, Red Etc.||Test:||100% Electrical Test Prior Shipment|
Hybrid High Frequency Multilayer PCB 4 Layer Hybrid PCB Board Bulit On Rogers 20mil RO4003C and FR-4
(PCB’s are custom-made products, the picture and parameters shown are just for reference)
Today we talk about 4-layer hybrid PCB built on 20mil RO4003C and FR-4.
Firstly, it's a 4 layer structure. Layer 1 to layer 2 is 20mil RO4003C core, which is the main wiring layer for the signal lines. Layer 3 to layer 4 is the core of FR-4, both cores are combined through 0.2mm prepeg. Each layer is connected by plated through holes. The inner layer and out layer of copper is 1 ounce. This is a good method to keep the board cost effective.
Let's take a look at its micro-section chart.
Here on the left is the PTH hole, the bottom is layer 1 to layer 2 which is high frequency material, the upper part is glass fiber material. The finished thickness of the plate is 1.6mm.
The color of solder mask and silkscreen are also commonly used in green and white. Surface finish on pads is immersion gold.
Following is another type of 20mil RO4003C hybrid PCB. It’s made of 2 cores of 20mil RO4003C.
The applications of 20mil RO4003C hybrid PCB is wide, such as LNA, optical coupler, balanced amplifier, duplexer etc.
The advantages of 20mil RO4003C hybrid PCB are reflected in following 3 points:
1) RO4003C exhibits a stable dielectric constant over a broad frequency range. This makes it an ideal substrate for broadband applications.
2) Reducing signal loss in high frequency application meets the development needs of communication technology.
3) Cost reduced over stack-ups with all low loss material;
Our PCB Capability (Hybrid Design)
At present, the mature mixed pressing materials are as follows:
RO4350B + FR4;
RO4003C + FR4;
F4B + FR4;
RT/duroid5880 + FR4
RT/duroid5880 + RO4350B
Thank you for your reading. You’re welcome to contact us for your RF PCB enquiries.
Appendix: Data Sheet of RO4003C
|Dielectric Constant,εProcess||3.38±0.05||Z||10 GHz/23℃||IPC-TM-650 184.108.40.206 Clamped Stripline|
|Dielectric Constant,εDesign||3.55||Z||8 to 40 GHz||Differential Phase Length Method|
|Thermal Coefficient of ε||+40||Z||ppm/℃||-50℃to 150℃||IPC-TM-650 220.127.116.11|
|Volume Resistivity||1.7 x 1010||MΩ.cm||COND A||IPC-TM-650 18.104.22.168|
|Surface Resistivity||4.2 x 109||MΩ||COND A||IPC-TM-650 22.214.171.124|
|Electrical Strength||31.2(780)||Z||Kv/mm(v/mil)||0.51mm(0.020")||IPC-TM-650 126.96.36.199|
|MPa(ksi)||RT||ASTM D 638|
|MPa(ksi)||RT||ASTM D 638|
|after etch+E2/150℃||IPC-TM-650 2.4.39A|
|Coefficient of Thermal Expansion||11
|Tg||>280||℃ TMA||A||IPC-TM-650 188.8.131.52|
|Td||425||℃ TGA||ASTM D 3850|
|Thermal Conductivity||0.71||W/M/oK||80℃||ASTM C518|
|Moisture Absorption||0.06||%||48hrs immersion 0.060"
sample Temperature 50℃
|ASTM D 570|
|Density||1.79||gm/cm3||23℃||ASTM D 792|
|Copper Peel Stength||1.05
|after solder float 1 oz.
|Lead-free Process Compatible||Yes|
Contact Person: Mr. Kevin Liao