RO4350B, 4003C; Rogers 5880, 5870, 6002, 6010, 6006, 6035; RO3003, RO3035, RO3006, RO3010, RO3210,RO3203
TLX-8, TLX-6, TLX-9, TLX-0, TLX-7, TLY-3, TLY-5, RF-35TC, RF-60TC, RF-35A2, RF-60A, AD450, AD600, TMM4, TC350
|Place of Origin:||China|
|Brand Name:||Bicheng Technologies Limited|
|Minimum Order Quantity:||1|
|Price:||USD 2.99-9.99 PER PIECE|
|Delivery Time:||10 working days|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||45000 pieces per month|
|Number Of Layers:||2||Glass Epoxy:||AD450|
|Final Foil:||1.0 Oz||Final Height Of PCB:||1.1 Mm ±10%|
|Surface Finish:||Immersion Gold||Solder Mask Color:||Green|
|Colour Of Component Legend:||White||Test:||100% Electrical Test Prior Shipment|
Arlon RF PCB Built on AD450 40mil 1.016mm DK4.5 With Immersion Gold for Higher Frequency Applications
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers' (Arlon) AD450 is a woven fiberglass reinforced, ceramic filled, PTFE based composite material for use as a printed circuit board substrate. The woven fiberglass provides better dielectric constant and thickness uniformity, better dimensional stability as well as reduced manufacturing costs.
The electrical properties of AD450 suggest it can readily replace FR-4 in applications where higher frequencies and expectations for increased fidelity with broadband signal are beyond the performance offered by FR-4.
With a dielectric constant of 4.5, most FR-4 designs can be readily transferred. Its higher thermal conductivity and lower CTE also promote its use in higher power designs, where temperature extremes and heat rejection are primary considerations.
AD450 is compatible with processing used for standard PTFE based printed circuit board substrates. In addition, its low Z-axis thermal expansion will improve plated through hole reliability, compared to typical PTFE based laminates.
1. Circuit Board Miniaturization
2. Multimedia Transmission Systems
3. Wide Band Antenna Applications
4. Replacement of FR-4 in Higher Frequency Applications
Figure 1 demonstrates the stability of dielectric constant across frequency.
Figure 2 demonstrates the stability of dissipation factor across frequency.
Our PCB Capability(AD450)
|PCB Material:||Woven Fiberglass Re inforced, Ceramic filled, PTFE based Composite|
|Layer count:||Double Layer, Multilayer, Hybrid PCB|
|Copper weight:||0.5oz (17 µm), 1oz (35µm), 2oz (70µm)|
|PCB thickness:||10mil (0.254mm), 20mil (0.508mm), 30mil(0.762mm), 40mil(1.016mm), 50mil (1.27mm), 60mil (1.524mm), 70mil(1.778mm), 90mil (2.286mm), 180mil (4.572mm), 200mil (5.08mm), 230mil (5.842mm)|
|PCB size:||≤400mm X 500mm|
|Solder mask:||Green, Black, Blue, Yellow, Red etc.|
Bare copper, HASL, ENIG, OSP etc..
Data Sheet of AD450
|Dielectric Constant @ 200 MHz||IPC TM-650 220.127.116.11||C23/50||4.5|
|Loss Tangent @ 10 GHz||IPC TM-650 18.104.22.168||C23/50||0.0035|
|Thermal Coefficient of Er||IPC TM-650 22.214.171.124||- 10℃ TO +140℃||-233.5|
|Copper Peel Strength (lb/in)||IPC TM-650 2.4.8||A, TS||>12|
|Volume Resistivity (MΩ-cm)||IPC TM-650 126.96.36.199||C96/35/90||1.2 X 109|
|Surface Resistivity (MΩ)||IPC TM-650 188.8.131.52||C96/35/90||4.5 X 107|
|Arc Resistance (seconds)||ASTM D-495||D48/50||>180|
|Tensile Modulus (kpsi)||ASTM D-638||A, 23℃||>700|
|Tensile Strength (kpsi)||ASTM D-882||A, 23℃||>20|
|Compressive Modulus (kpsi)||ASTM D-685||A, 23℃||>350|
|Flexural Modulus (kpsi)||ASTM D-790||A, 23℃||>540|
|Dielectric Breakdown (kV)||ASTM D-149||D48/50||>45|
|Density (g/cm3)||ASTM D-792 Method A||A, 23℃||2.45|
|Water Absorption (%)||IPC TM-650 184.108.40.206||E1/105 + D24/23||0.07|
|Coefficient of Thermal Expansion (ppm/℃) X Axis Y Axis Z Axis||IPC TM-650 2.4.24 TMA||0℃ to 100 ℃||8 11 42|
|Thermal Conductivity (W /mK)||ASTM E-1225||100℃||0.38|
|Outgassing Total Mass Loss (%) Collected Volatile Condensable Material (%) Water Vapor Recovered||NASA SP-R-0022A Maximum 1.00% Maximum 0.10%||125℃, ≦10-6 torr||0.01 0.01 0.00|
|Flammability||UL 94 Vertical Burn||C48/23/50, E24/125||UL94-V0|
Contact Person: Mr. Kevin Liao