RT/duroid 5880LZ High Frequency PCBfor RF microwave antenna

Introduction

RT/duroid 5880LZ laminates are PTFE composites engineered for precise strip-line and micro-strip circuits. They incorporate a specialized filler resulting in low density and lightweight construction ideal for weight-sensitive, high-performance applications.

Let's explore some of the impressive properties that make 5880LZ stand out:

It has a dielectric constant of 2.00 ± 0.04 at 10GHz and 23°C in the Z direction per IPC standards. This enables reliable signal transmission. The design dielectric constant remains 2.00 from 8GHz to 40GHz.

Dissipation factor or tan delta is extremely low - typically 0.0021, maximally 0.0027 at 10GHz/23°C - minimizing signal loss.

The thermal coefficient of dielectric constant is +20 ppm/°C over -50°C to 150°C at 10GHz. This confers excellent stability versus temperature.

Electrically, volume and surface resistivity exceed 10^7 and 10^6 Mohm-cm respectively under IPC test conditions.

Electric strength is specified at 40KV, ensuring durability in tough environments.

In terms of dimensional stability, RT/duroid 5880LZ demonstrates remarkable performance with just -0.38% change in X and Y directions per IPC standards. This ensures consistent, reliable behavior.

Moisture absorption is only 0.31% after 24 hours at 23°C, indicating excellent moisture resistance as specified by IPC.

Thermal conductivity in the Z axis is 0.33 W/mK at 80°C via ASTM C518.

Coefficient of thermal expansion is moderately low at 54 ppm/°C (X), 47 ppm/°C (Y) and 40 ppm/°C (Z) over 0°C to 150°C. This confers dimensional stability with temperature fluctuations.

Rigorous ASTM outgassing tests are passed, with minimal Total Mass Loss, Collected Volatile Condensable Materials and Water Vapor Regain of 0.01% each.

With a density of 1.4 gm/cm^3, 5880LZ provides lightweight yet robust high frequency performance.

Copper peel strength exceeds 4.0 pli, ensuring excellent copper bonding and reliability.

Flammability is V-0 rated per UL 94 standards for resistance to ignition and flame spread.

Lastly, 5880LZ is compatible with lead-free processes for an eco-friendly solution.

RT/duroid 5880LZ PCB Capabilities

For RT/duroid 5880LZ printed circuit boards, we offer single-layer, double-layer, multilayer, and hybrid constructions. These boards are available in a wide range of standard thicknesses including 10 mils, 20 mils, 50 mils, and 100 mils to suit various designs.

The finished copper weight on the boards can be specified as 1 oz or 2 oz. Our maximum panel size for 5880LZ high frequency boards measures 400mm by 500mm. This allows production of either a single large board or many smaller boards in one panel.

We have various solder mask colors in-house, including green, black, blue, yellow, and more. For pad plating, we offer immersion gold, immersion silver, immersion tin, bare copper and other finishes.

Please contact us to discuss your specific requirements for RT/duroid 5880LZ PCBs. We have extensive capabilities to fulfill your high frequency circuit needs.

A Piece of RT/duroid 5880LZ PCB
Now what we are seeing on the screen is a type of 20mil RT/duroid 5880LZ PCB with immersion gold, a double layer board. In our lives, we can find their typical applications in the area of airborne antenna system, lightweight feed networks, point-to-point digital radio antennas etc.

Conclusion
RT/duroid 5880LZ has Z-axis coefficient of thermal expansion (CTE) at 40 ppm/°C. This is a low value that ensure its reliable plated through holes.

When ordering RT/duroid 5880LZ PCB, it is important to specify the dielectric thickness, weight of copper foil required and surface finish.