Just as its name implies, high frequency is that the frequency is relatively high, generally refers to the frequency of >=300 MHz (i.e. wave length <=1m), that is, the usual radio frequency band. The electromagnetic wave of frequency >=1GHz is called microwave.
High frequency printed circuit board or microwave PCB refers to the printed circuit board made on the high frequency (microwave) substrate copper clad plate. The common types are: Double-sided board, multilayer board and mixed structure.
Mixed structure includes high performance special substrate, PP sheet + ordinary performance board and PP sheet mixed pressing board; high frequency substrate + ordinary FR4 substrate; high frequency substrate + metal base etc.
1) The characteristic of low dielectric loss makes the signal loss at a lower level, which makes the signal transmission of the whole equipment excellent;
2) Low water absorbability influences dielectric constant and dielectric loss less at damp;
3) The temperature coefficient of dielectric constant is among the lowest of any circuit board material, making it ideal for temperature sensitive applications;
4) Stable electrical coefficient of dielectric constant;
5) Superior corrosion resistance;
6) The dielectric constant (DK) is low and stable, so the signal transmission is good without delay;
Typical frequencies for wireless applications:
* Current mobile: 0.9GHz - 2GHz
* 3G systems: 2.5GHz
* Bluetooth: 2.5GHz
* GPS: 12.6GHz
* LMDS: 24GHz and 40GHz
* Automotive: 77GHz
RFID, Wireless communications, base station and antenna, amplifier, military products, consumer electronics.
PCB Products and PCB Services
1) Material type: RO4350B, RO4003C, F4(PTFE), RF-35A2, TLA-6 etc.
2) PCB type: Double sided and multilayer PCB.
3) Hybrid of FR-4 and high freqency material combined.
4) RO4350B laminates: 10mil (0.254mm), 13.3mil (0.338mm), 20mil (0.508mm), 30mil (0.762mm), 60mil
5) RO4003C laminates: 12mil(0.305mm), 20mil(0.508mm), 32mil(0.813mm)
6) Base copper 0.5oz and 1oz
7) Solder mask most commonly used: Green and Red
8) Surface finish most commonly used:Immersion gold, copper exposure and HASL
9) Prototype, small batches run and volume production.
10) MOQ: 1PCS.
11) Door to door shipment service
Payment & Shipping Terms:
|Number Of Layers:||4||Glass Epoxy::||FR-4 TG135℃ And RO4350B Tg 288℃|
|Final Foil:||1 Oz||Final Height Of PCB::||1.6 Mm ±10%|
|Surface Finish:||Immersion Gold Immersion Gold (11.9% ) 0.05um Over 3um Nickel||Solder Mask Color::||Green|
|Colour Of Component Legend:||White||Test:||100% Electrical Test Prior Shipment|
|PCB SIZE||80 x 33mm=1PCS|
|BOARD TYPE||Hybrid PCB|
|Number of Layers||Multilayer Hybrid PCB, 4 layer PCB|
|Surface Mount Components||YES|
|Through Hole Components||YES|
|LAYER STACKUP||Top layer, copper ------- 35µm(1oz) TOP layer|
|0.508mm RO4350B (dielectric 1)|
|GND layer, copper ------- 35µm(1oz) MidLayer 1|
|0.40mm FR-4 (dielectric 2)|
|Signal layer, copper ------- 35µm(1oz) MidLayer 2|
|0.60mm FR-4 (dielectric 2)|
|Bottom layer, copper ------- 35µm(1oz) BOT Layer|
|Minimum Trace and Space:||5mil/5.3mil|
|Minimum / Maximum Holes:||0.3/5.98mm|
|Number of Different Holes:||14|
|Number of Drill Holes:||631|
|Number of Milled Slots:||0|
|Number of Internal Cutouts:||0|
|Number of Gold finger:||0|
|Glass Epoxy:||FR-4 TG135℃ and RO4350B Tg 288℃|
|Final foil external:||1oz|
|Final foil internal:||1oz|
|Final height of PCB:||1.6mm ±10%|
|PLATING AND COATING|
|Surface Finish||Immersion gold Immersion gold (11.9% ) 0.05um over 3um nickel|
|Solder Mask Apply To:||TOP and Bottom, 12micron Minimum|
|Solder Mask Color:||Green, PSR-2000 KX700G, Taiyo Supplied.|
|Solder Mask Type:||LPSM|
|Side of Component Legend||TOP.|
|Colour of Component Legend||White, IJR-4000 MW300, Taiyo Supplied.|
|Manufacturer Name or Logo:||Marked on the board in a conductor and leged FREE AREA|
|VIA||Plated through hole(PTH)|
|FLAMIBILITY RATING||UL 94-V0 Approval MIN.|
|Outline dimension:||0.0059" (0.15mm)|
|Board plating:||0.0030" (0.076mm)|
|Drill tolerance:||0.002" (0.05mm)|
|TEST||100% Electrical Test prior shipment|
|TYPE OF ARTWORK TO BE SUPPLIED||email file, Gerber RS-274-X, PCBDOC etc|
|SERVICE AREA||Worldwide, Globally.|